Fleece solid color hooded sweatshirt with smooth overall lines, loose and structured silhouette, simple and accommodating lines, high thread count fabric; matching color metal head round cord for a visual memory effect, presenting a unique vibrant new street casual feel, low-key yet distinctive. Constant temperature warm skin technology fabric with a light fleece interior, efficiently and quickly warms up, self-heating, and locks in heat for a long time.
Features
Snug collar for wind protection
Kangaroo pockets
Drop shoulders
Oversized fit
Fabric
Pre-shrunk
Fabric weight: 345g/m²
Added fleece for extra thickness
Styles
Loose and structured fit
Trendy street casual feel
Smooth overall contour lines
Care instructions
Hand washIron, medium temperatureLine dryDo not bleachDo not dry clean
Size Guide
This size guide shows product measurements taken when products are laid flat. Actual product measurements may vary by up to 1" (2.5cm).
A) Length
Place the end of the tape beside the collar at the top of the shirt (Highest Point Shoulder). Pull the tape measure to the bottom of the shirt.
B) Half Chest
Lay the garment down on a flat surface and measure it from left to right across the chest, about 2cm below the arms.
Imperial (in)
S
M
L
XL
2XL
3XL
Chest
22.83
23.62
24.41
25.2
25.98
26.77
Length
26.77
27.56
28.35
29.13
29.92
30.71
Shoulder
22.44
23.23
24.02
24.8
25.59
26.38
Sleeve length
21.65
22.05
22.44
22.83
23.23
23.62
Metric (cm)
S
M
L
XL
2XL
3XL
Chest
58
60
62
64
66
68
Length
68
70
72
74
76
78
Shoulder
57
59
61
63
65
67
Sleeve length
55
56
57
58
59
60
Print guide
1. Upload files in JPG and PNG formats with at least 150 dpiFor the best printing performance, make sure you upload images with at least 150 dpi. We recommend using PNG and SVG,because PNG's background is transparent, SVG's size is small and can be scaled without changing the quality of the image.
2. Make your design with the sRGB color profileThe color might be effected when converted to CMYK color profile which is used for printing. For the best accuracy, we suggest that you convert the print file to sRGB color profile in your design software.
3. Design and refer to the recommend size for each canvasWe now don't support the product templates for designing on your side. Make sure that print files have at least 150 dpi after eidting.
1. Safe print & Stitching areaSafe print area Keep all your designs are in the safe print area, in case your designs will be lost during production. Stitching areaThis area will be stitched during production. Please make sure your designs are not in this place.
2. Get all print area covered
3. Use full-bleed imagesAny space that isn't covered by designs will show the bare fabric, which may destroy the design.
4. Don't try to match designs across adjacent canvasEven though you match designs across adjacent canvas perfectly on mockup or our 3D model, it's not possible to achieve the perfect design on the finished product.
5. Logo Safety AreaIt refers to an area to keep your logo which will be printed complete on the apparels, especially some neck labels which are near the stitching area.Click 'Gridlines' button and see some little squares, keep your logo at least one square height away from the black line, then, your logo is in the safety area.
Features
Fabric
Styles
